Only electricity and water are used.
This series generates superheated steam with supplied water.
No extra equipment required. Installable in a wide range of locations.
Our triangular transformer comprises three-phase coils placed in a triangular arrangement around a Y-shaped wound magnetic core, providing high performance with no imbalance between phases.Another feature is the special circular magnetic core created by our original manufacturing process. The minimum electrical wiring is used based on the concept that the circumferential length can be minimized when traveling around the same sectional area. The result saves both energy and resources simultaneously.
The W Series generates superheated steam using the heat created by the electric current passing through the coiled conductor tubes.Water is pre-heated in the primary wound conductor tube and converted into saturated steam and then to superheated steam while traveling in the secondary wound conductor tube.
The W Series utilizes a PID (Proportional-Integral-Derivative) controller for thermal adjustments, automatically and instantly adjusting the controller’s proportional coefficient according to the steam volume and temperature. There is no need to manually change the settings to suit different operational conditions.
W Series Specifications
|Steam production volume
||Three phase 50/60Hz 200/220V
||Approx. 20 minutes
||95％ or more
||Categorized as simplified boiler, etc.
* The characteristic values above are measured at a temperature of 700°C.
* These products were developed with Kansai Electric Power Co., Inc.
Types of UPSS Superheated Steam Generator